發電電氣專業相關成績單課程英文翻譯

國內電氣系統專業的同學在涉及到出國留學或者海外就業方面，需要提供英文版本的成績單，英文成績單在翻譯是對院校提供的中文成績單進行翻譯，在課程名方面，要采用院校規定的專用名，保證成績單翻譯課程名的正確性，同時在加蓋翻譯工作的認證印章。

成績單課程中文名稱：發電廠電氣系統

成績單翻譯課程英文名稱： ELECTRIC SYSTEM OF POWER PLANT

課程簡介：

發電廠電氣系統是電力系統及其自動化專業方向的主要基礎課，首先介紹電氣主接線的基本形式；限制短路電流的方法；各種類型發電廠和變電所主接線的特點；廠用接線的設計原則和接線形式；不同類型發電廠的廠用電接線；廠用電動機的選擇和自啟動校驗。導體、電纜、絕緣子和套管的選擇；高壓斷路器的原理與選擇；隔離開關的選擇；電流互感器、電壓互感器的原理與選擇；限流電抗器的選擇；高壓熔斷器的選擇。最后介紹同步發電機的運行；變壓器的運行。

Course Description：

This is the main basic course for the specialty of power system and automation. We begin with the introduction to the main connection line of power system and its form, the method of restricting the short circuit current and peculiarity of all kinds of main connection lines of the power plants and power substations. Secondly, we introduce various types of main lines of plant itself, and how to design these main lines. And we introduce how to select the motors for the plant and verify whether it can start up. Thirdly, we introduce how to select the lines, cables, insulators, thimbles and high voltage breaks and switches, and other electric equipments including current transformers, voltage transformers, the reactors and high voltage fuses. Finally，we discuss the running problems of synchronous generators and power transformers.

成績單課程中文名稱：仿真技術及應用

成績單翻譯課程英文名稱：COMPUTER SIMULATION TECHNOLOGY AND ITS APPLICATION

課程簡介：

仿真技術及應用是電氣工程及其自動化專業的平臺課。主要介紹計算機仿真的歷史、現狀及發展方向；數學模型的分類,包括：連續系統的數學模型，離散時間系統的數學模型，采樣系統的數學模型；建立連續、離散系統數學模型的方法；模型處理方法包括非線性模型的線性化處理，連續系統模型的離散化處理，各類系統模型的轉換。連續系統的數字仿真方法，歐拉法及改進歐拉法， 阿達姆法，龍格庫塔法，線性多步法，變步長法，數值積分法穩定性分析和數值積分方法的選擇原則，采樣控制系統的仿真方法。最后介紹計算機仿真軟件的發展及常用計算機仿真軟件的使用方法。

Course Description：

This course is a foundational course for the specialty of electrical engineering and its automation. The past, present and future development of the computer simulation are first introduced. The mathematics model is classified respectively, while the mathematics models of continuous systems and discrete systems and sampling systems will be introduced. Then we introduce the methods of structuring the mathematics model of continuous systems and discrete systems, and the methods of transform model that involve linearizing the nonlinear model, reducing the model rank, transforming a continuous system to be discrete and transforming the model to another form. Next we discuss the numerical value simulation method of continuous systems, including the Euler method and the betterment Euler method, Adams method and Runge-Kutta method, linear lot steps method and variable step length method. Then analysis of the stability of numerical value integral and the select method of numerical value integral are discussed. And the simulation method of sampling control systems is introduced. Finally, introduce the common computer simulation software and the development of the computer simulation software.

• 證明翻譯

  2020-01-03

• 診斷證明書翻譯

  2020-01-03

• 病歷翻譯

  2020-01-03

• 親屬關系證明翻譯

  2020-01-03

• 證書翻譯

  2020-01-02

• 出生證明翻譯

  2020-01-03

• 房產證翻譯

  2020-01-02

• 營業執照翻譯

  2020-01-02

• 身份證翻譯

  2020-01-02

• 學位證翻譯

  2020-01-03

• 無犯罪證明翻譯

  2020-01-03

• 結婚證翻譯

  2020-01-02

• 護照翻譯

  2020-01-02

• 核酸檢測報告英文版翻譯

  2023-01-04

• 核酸檢測報告翻譯

  2023-01-04

• 新冠疫苗接種證明翻譯

  2020-01-03

• 疫苗本翻譯

  2020-01-03

• 戶口本翻譯

  2020-01-02